请问网件 R6300 V2 怎么刷 DD-WRT 固件？

[Robias]

之前家里用的TPLINK的，现在已经跟不上节奏了。所以双11淘了一个网件的R6300 V2路由器，之前也有所耳闻，说网件的软件太烂，大部分都刷了DD，但是听朋友说一定要做足功课，否则会变成砖头，所以特来此问问大家有没有详细教程啊，谢谢！

[phoenixlzx]

表示公司的路由器全部是这货
然后全部刷了DDWRT
然后我给刷回去之后性能飙涨
然后批量部署了原版固件的现在下行性能又掉下来了....

[20140930]

http://luyou.xunlei.com/forum.php?mod=viewthread&tid=426&fromuid=3327

[Robias]

@20140930 亲，这个帖子刚才看了额，但是原始地址也打不开，百度网盘也失效了。

@phoenixlzx 就是冲着这个买的啊。

[ahui]

科学上网,然后
http://www.desipro.de/ddwrt-ren/K3-AC/

Flashing Instruction:

Before flashing I recommend to reboot the router. Nand devices with longer uptimes can hit a bad memory block while flashing.

Netgear OEM Firmware -> choose the correct .chk for your router model in ftp directory Initial.

(A chk contains a header that identifies the build as suitable for the specific router model, oem firmware check this header)


Asus/Linksys/Buffalo -> first flash initial flash files provided by BrainSlayer

DD-WRT already installed -> flash universal build dd-wrt.v24-K3_AC.bin (suported models Netgear R6300/WNDR4500 V1/V2,D1800H, Asus AC66U, Linksys EA6500V1 )
from subdirectory that contains the latest revision.
(Once dd-wrt is installed you can flash universal fw .bin files for the right architecure, e.g. Broadcom AC router, afterwards)





Flashing back to Netgear Firmware is supported in builds >= 22127. Just use the dd-wrt webinterface and upload netgear firmware.

[ultragtx]

http://www.chiphell.com/forum.php?mod=viewthread&tid=957807&extra=page%3D1%26filter%3Dtypeid%26typeid%3D289

[Robias]

@ultragtx 谢谢。